End Face Milling Machine with Longer Working Stroke

Home > Tradeoffer > End Face Milling Machine with Longer Working Stroke

Welding Manipulator
Welding Rotator
Welding Positioner
Customized Welding Solution
Plate Shot Blasting Machine
CNC Cutting Machine
Edge Milling Machine
Plate Rolling Machine
Welding Manipulator
Fit-up Rotator
Fit-up Growing Line
Sand Blasting Welding Rotator

Europe Column and Boom Welding Manipulator 2X2M
1. Machine picture: 2. Sketch: 3. Qualified motors & gearbox transmission ...

Frequently Asked Questions - Leaderweldingrotator.com
Customer:Where are you located ？ WellLeader: We are in Wuxi, Jiangsu, China. The nearest international airport isPudong Airport (PVG). Customer:Can I visit your factory? WellLead...

First Load in 2018!

A good starting in 2018! Today, we are loading 1X20GP for Malaysia customer, who ordered one PLASMA CUTTING MACHINE and one SELF ALIGN WELDING ROTATOR. It would take 10-15 days to reach cust...

Fit Up Table Pole Body And Flange Welding Motorized leveling Taper Pole
Fit Up Table Pole Body And Flange Welding Motorized leveling Taper Pole Technical Parameters:1. Applied flange size: min 150x150mm...

Fix Type Tank Welding Rotator Roller

Fix type welding rotator is settled in the ground when the vessel is lowered into place.There are no couplings to change and no pins to remove or replace.You can see it like in the picture below...

End Face Milling Machine with Longer Working Stroke This machine is used to mill the end profile of H beam or BOX column, max job profile is 3000x1500mm, min is 300x200mm.Technical ParametersMill motor power: P=7.5KW HD750Horizontal milling speed: 100-800mm/min VFD by inverterHorizontal slides idle speed: 1200mm/minMilling head vertical speed: 100-800mm/min VFD by inverterHorizontal feeding motor power: 1.5KwVertical motor power: 2.2KwSpindle speed of milling head: 75-420rpm, in six steps, adjust by outside hand wheel. (Note: this is an updated model to avoid opening gearbox and changing gears inside to change speed)Milling head range: 0-45dgrMilling cutter seat size: Φ125-250mmMilling spindle stroke: L=100mmMilling spindle diameter: Φ128.57mm Product Details