Tilting Square Table Pipe Welding Positioners 1 Ton Rated Capacity Pipe Welding Positioner Loading & Tilting 1 Ton Squre Table CE approved   Joining pipes or attaching pipe fittings such as flanges and valves is a problematic task from an execution perspective due to the 360-degree work plane. Without the use of a tool such as the welding positioner, the artisan may have to constantly move around and under the pipe to complete the joint, which is not conducive to good quality welding. In particular, this causes fatigue, is time consuming, and requires vertical and overhead welding runs with frequent interruptions for re-positioning. A high quality arc welded seam requires adequate penetration of the material, a level work piece orientation, and carefully controlled welding speed with a minimum of interruptions. To achieve good arc penetration, the welder needs to work at the highest amperage rating the welding rod or electrode will allow. For this to be effective, the work piece needs to be level so that the pool of molten metal settles into the seam without sagging or running. This is the biggest problem with welding vertical or overhead runs where lower amperage settings are required to prevent sagging of the weld pool. Correct weld speed and run continuity are also vital components of a sound welded joint. The positioner is obliged to provide continous and sustainble rotate speed, which is important for getting successful welding quality. Product Details Model HB-03 HB-05 HB-10 HB-20 HB-30 HB-50 HB-100  Rated capacity 300kg 500kg 1000kg 2000kg 3000kg 5000kg 10000kg Max gravity at rated capacity 200mm 250mm 300mm 300mm 300mm 300mm 400mm Max eccentric at rated capacity 150mm 150mm 150mm 200mm 200mm 200mm 200mm Rotate speed(rpm) 0.2-2 0.12-1.2 0.12-1.2 0.1-1.0 0.05-0.5 0.05-0.5 0.05-0.5 Tilting speed(rpm) by hands/1.3 0.35 0.35 0.35 0.35 0.2 0.2 Tilt range 0-90° 0-90° 0-120° 0-120° 0-120° 0-120° 0-120° Rotate motor power 0.37kw 0.4kw 0.55kw 0.75kw 1.1kw 1.5kw 1.5kw Tilt motor power 0.37kw 0.37kw 0.55kw 0.75kw 1.1kw 1.5kw 2.2kw Table diameter Φ600mm Φ800mm Φ900mm Φ1100mm Φ1300mm Φ1600mm Φ2000mm